kuzminovayulia

Yulia Kuzminova

Research Scientist
Center for Materials Technologies

Yulia received a specialist degree at Belgorod State University in 2013 as a materials science engineer, where my diploma was focused on the investigation of the mechanical properties and microstructure of the austenitic stainless steel processed by multiple forging. Further, her education and job projects involved FEM analysis. As a structural analyst at the JSC Gas-Turbine Engineering RPC Salut, she performed static analyses of engine parts. Combining her knowledge of materials and 3D modeling, Yulia continued her education at Skoltech, working with metal additive technologies. She graduated a Ph.D. program in 2023. During the study, she focused on the investigation of various additive manufactured materials such as stainless steel, titanium and nickel alloys, and high entropy alloys.

Supervisor: Stanislav Evlashin

  • Structural and mechanical properties of the additive manufactured CrFeCoNi(Al,Ti) high-entropy alloys produced using powder blends, O. Kuzminova, D.G. Firsov, A.A. Shibalova, E.A. Kudryavtsev, P. Krakhmalev, O.G. Klimova-Korsmik, I. V Shishkovsky, S.A. Evlashin, Materialia. (2023) 101957.
  • Magnetic and mechanical properties of 316L/410L/316L sandwich structure produced by direct energy deposition, S.A. Evlashin, A.A. Volkova, R. V Mendagaliev, K.D. Babkin, J. V Bondareva, A.P. Simonov, Y.O. Kuzminova, O.N. Dubinin, D.A. Chernodubov, A.A. Shibalova, I.A. Kobykhno, O.G. Klimova-Korsmik, Mater. Today Commun. 37 (2023) 107230.
  • Boron as an alloying element for improving mechanical properties of austenitic stainless steels in laser powder bed fusion, Evlashin, S., Kuzminova, Y., Simonov, A., Firsov, D., Dubinin, O., Rogozin, O., Perevozchikov, M., Akhatov, I., Materialia. 32 (2023) 101908.
  • In Situ Neutron Diffraction Investigating Microstructure and Texture Evolution upon Heating of Nanostructured CoCrFeNi High-Entropy Alloy, Liu, X., Han, J.-K., Onuki, Y., Kuzminova Y., Evlashin, S., Kawasaki, M., Liss, K.-D. Advanced Engineering Materialsthis, 2023, 25(6).
  • The mechanical behavior of the Ti6Al4V/Ti/Ti6Al4V composite produced by directed energy deposition under impact loading. Kuzminova, Y.O., Dubinin, O.N., Gushchina, M.O.,…Zhilyaev, A.P., Evlashin, S.A., Materialia, 2023, 27.
  • The oxidation behavior of the CrFeCoNiAlx (x = 0, 1.0, and 5.0 wt%) high-entropy alloy synthesized with Al elemental powder via powder bed fusion technique at high temperatures. Kuzminova, Y. O., Firsov, D. G., Shibalova, A. A., Evlashin, S. A., Shishkovsky, I. v., & Dautov, S. S. (2023). Micron, 166.
  • Process Parameter Selection for Production of Stainless Steel 316L Using Efficient Multi-Objective Bayesian Optimization Algorithm. Chepiga, T., Zhilyaev, P., Ryabov, A., Simonov, A. P., Dubinin, O. N., Firsov, D. G., Kuzminova, Y. O., & Evlashin, S. A. (2023). Materials, 16(3), 1050.
  • The mechanical behavior of the Ti6Al4V/Ti/Ti6Al4V composite produced by directed energy deposition under impact loading. Kuzminova, Y. O., Dubinin, O. N., Gushchina, M. O., Simonov, A. P., Konev, S. D., Sarkeeva, A. A., Zhilyaev, A. P., & Evlashin, S. A. (2023). Materialia, 27.
  • Multilayer composite Ti-6Al-4 V/Cp-Ti alloy produced by laser direct energy deposition. Gushchina, M. O., Kuzminova, Y. O., Dubinin, O. N., Evlashin, S. A., Vildanov, A. M., Klimova-Korsmik, O. G., & Turichin, G. A. (2023). International Journal of Advanced Manufacturing Technology, 124(3–4), 907–918.
  • Effects of the quality of pre-consolidated materials on the mechanical properties and morphology of thermoplastic pultruded flat laminates. Minchenkov, K., Vedernikov, A., Kuzminova, Y., Gusev, S., Sulimov, A., Gulyaev, A., Kreslavskaya, A., Prosyanoy, I., Xian, G., Akhatov, I., & Safonov, A. (2022). Composites Communications, 35.
  • Biodegradable iron-silicon implants produced by additive manufacturing, V Bondareva, O.N. Dubinin, Y.O. Kuzminova, A.I. Shpichka, N. V Kosheleva, A. V Lychagin, A.A. Shibalova, A.A. Pozdnyakov, I.S. Akhatov, P.S. Timashev, S.A. Evlashin, Biomed. Mater. 17 (2022) 35005.
  • In Situ Heating Neutron and X-Ray Diffraction Analyses for Revealing Structural Evolution during Postprinting Treatments of Additive-Manufactured 316L Stainless Steel. Kawasaki, M., Han, J., Liu, X., Onuki, Y., Kuzminova, Y.O., Evlashin, S.A., Pesin, A.M., Zhilyaev, A.P. and Liss, K. (2022), Adv. Eng. Mater., 24: 2100968.
  • Effect of Scanning Strategy on Mechanical Properties of Ti-6Al-4V Alloy Manufactured by Laser Direct Energy Deposition. Gushchina, M.O., Kuzminova, Y.O., Kudryavtsev, E.A. et al. J. of Materi Eng and Perform 31, 2783–2791 (2022).
  • Effect of recycled powder content on the structure and mechanical properties of Ti-6Al-4V alloy produced by direct energy deposition, Svetlana A. Shalnova, Yulia O. Kuzminova, Stanislav A. Evlashin, Olga G. Klimova-Korsmik, Artur M. Vildanov, Anastasia A. Shibalova, Gleb A. Turichin, Journal of Alloys and Compounds, Volume 893, 2022, 162264.
  • Gradient soft magnetic materials produced by additive manufacturing from non-magnetic powders, O.N. Dubinin, D.A. Chernodubov, O. Kuzminova, D.G. Shaysultanov, I.S. Akhatov, N.D. Stepanov, S.A. Evlashin, J. Mater. Process. Technol. 300 (2022) 117393.
  • Modification of mechanical properties in directed energy deposition by a static magnetic field: Experimental and theoretical analysis. Filimonov, A.M., Rogozin, O.A., Dubinin, O.N., Kuzminova, Y.O., …Akhatov, I.S., Evlashin, S.A. Materials, 2021, 14(18), 5190.
  • Phase and structural changes during heat treatment of additive manufactured CrFeCoNi high-entropy alloy. Kuzminova, Y.O., Kudryavtsev, E.A., Han, J.-K., Kawasaki, M., Evlashin, S.A. Journal of Alloys and Compounds, 2022, 889, 161495.
  • Anisotropy of Mechanical Properties and Residual Stress in Additively Manufactured 316L Specimens, A. Fedorenko, B. Fedulov, Kuzminova, S. Evlashin, O. Staroverov, M. Tretyakov, E. Lomakin, I. Akhatov, Materials (Basel). 14 (2021).
  • Structural effect of low Al content in the in-situ additive manufactured CrFeCoNiAlx high-entropy alloy. Kuzminova, Y., Shibalova, A., Evlashin, S., Shishkovsky, I., & Krakhmalev, P. (2021). Materials Letters, 303, 130487.
  • Structural evolution during nanostructuring of additive manufactured 316L stainless steel by high-pressure torsion. Han, J.-K., Liu, X., Lee, I., Kuzminova, Y.O., …Liss, K.-D., Kawasaki, M. Materials Letters, 2021, 302, 130364.
  • Cad/cam system for additive manufacturing with a robust and efficient topology optimization algorithm based on the function representation. Popov, D., Kuzminova, Y., Maltsev, E., …Akhatov, I., Pasko, A. Applied Sciences (Switzerland) , 2021, 11(16), 7409.
  • Fatigue behavior of additive manufactured CrFeCoNi medium-entropy alloy. Kuzminova, Y. O., Firsov, D. G., Dagesyan, S. A., Konev, S. D., Sergeev, S. N., Zhilyaev, A. P., Kawasaki, M., Akhatov, I. S., & Evlashin, S. A. (2021). Journal of Alloys and Compounds, 863, 158609.
  • Significance of grain refinement on micro-mechanical properties and structures of additively-manufactured CoCrFeNi high-entropy alloy. Zhao, W., Han, J.-K., Kuzminova, Y.O., …Liss, K.-D., Kawasaki, M. Materials Science and Engineering A, 2021, 807, 140898.
  • Hardening of additive manufactured 316l stainless steel by using bimodal powder containing nanoscale fraction. Filimonov, A.M., Rogozin, O.A., Firsov, D.G., Kuzminova Y.O.,…Akhatov, I.S., Evlashin, S.A. Materials, 2020, 14(1), стр. 1–14, 115.
  • Environmentally-friendly method of silicon recycling: synthesis of silica nanoparticles in aqueous solution / Julia V. Bondareva, Timur F. Aslyamov, Alexander G. Kvashnin, Pavel V. Dyakonov, Yulia O. Kuzminova, Yuri A. Mankelevich, Ekaterina N. Voronina, Sarkis A. Dagesyan, Alexander V. Egorov, Roman A. Khmelnitsky, Michael A. Tarkhov, Nikolay V. Suetin, Iskander S. Akhatov, and Stanislav A. Evlashin / ACS Sustainable Chemistry & Engineering 2020 8 (37), 14006-14012.
  • Role of Nitrogen and Oxygen in Capacitance Formation of Carbon Nanowalls / S.A.Evlashin, F. S. Fedorov, P. V. Dyakonov, Yu. M. Maksimov, A. A. Pilevsky, K. I. Maslakov, O. Kuzminova, Yu. A. Mankelevich, E. N. Voronina, S. A. Dagesyan, V. A. Pletneva, A. A. Pavlov, M. A. Tarkhov, I. V. Trofimov, V. L. Zhdanov, N. V. Suetin, and I. S. Akhatov / J. Phys. Chem. Lett., 11 (2020).
  • The effect of the parameters of the powder bed fusion process on the microstructure and mechanical properties of CrFeCoNi medium-entropy alloys / Kuzminova, D.Firsov, A.Dudin, S.Sergeev, A.Zhilyaev, A.Dyakov, A.Chupeeva, A.Alekseev, D.Martynov, I.Akhatov, S.Evlashin / Intermetallics. 116 (2020) 106651.
  • Structure control of 316L stainless steel through an additive manufacturing / O. Kuzminova, D.G. Firsov, S.D. Konev, A.A. Dudin, S.A. Dagesyan, I.S. Akhatov, S.A. Evlashin / Lett. Mater., 2019, 9(4s) 551-555.
  • Σ3 CSL Boundary Distributions in an Austenitic Stainless Steel Subjected to Multidirectional Forging Followed by Annealing / M.Tikhonova, Kuzminova, X.Fang, W.Wang, R.Kaibyshev and A.Belyakov / Philosophical Magazine. – 2014. – Vol. 94 (no.36), – P. 4181–4196.
  • Nanocrystalline S304H austenitic stainless steel processed by multiple forging / M.Tikhonova, Y.Kuzminova, A. Belyakov, R. Kaibyshev / Reviews on Advanced Materials Science. – 2012. – Vol. 31, – P. 68-73.

Doctoral degree in Mathematics and Mechanics