Aldo Bischi
Center for Energy Systems
Dr. Aldo Bischi received his Ph.D. in “Energy and Process Engineering” from the Norwegian University of Science and Technology-NTNU (Norway) with a dissertation on Chemical Looping Combustion (CLC) reactor system design.
From 2012 until 2015, Dr. Bischi held a post-doctoral position in the “Group of Energy COnversion Systems” – GECOS at Politecnico di Milano (Italy), being awarded of a “Polimi International Fellowships”. He worked on distributed power generation: Combined Cooling, Heat and Power (CCHP) systems, dealing with all CCHP aspects from technical to economic point of view. In parallel, he has been involved in several research projects and consultancies with industrial partners. From academic year 2013/2014, he has been responsible for two years, as Adjunct Professor, for the course of “Energy and Environmental Systems” at the Politecnico di Milano master program in Management Engineering. Moreover he has been involved, as lecturer and CCHP expert, in several executive courses in Italy and UK.
Since 2016 he works as Assistant Professor at Skolkovo Institute of Science and Technology (Russian Federation) where he continues his research related to the development of mathematical models for the scheduling and design optimization of CCHP systems (integrated energy infrastructures) broadening at the same time his research area within innovative energy conversion processes.
- Distributed power generation optimization; Combined Cooling, Heat and Power generation & Renewable energy sources integration
- District Heating
- Fluidization engineering; Combustion, Gasification, Catalytic processes
- Carbon Capture and Storage (CCS): Chemical Looping Combustion & Reforming (CLC/CLR), Calcium Looping
- Hybrid geothermal-biomass power plants
- Electric and Thermal Energy Storage
- Hydrogen production; conventional & unconventional technologies
Peer reviewed publications
- G.Valenti, A.Bischi, S.Campanari, P.Silva, A.Ravidà, E.Macchi (2016), “Experimental and numerical study of a micro-cogeneration Stirling unit under on-off cycling operation”, under review (Applied Energy).
- C.Elsido, A.Bischi, P.Silva, E.Martelli (2016), “Two-stage MINLP algorithm for the optimal synthesis and design of networks of CHP units”, accepted for publication (Energy).
- A.Bischi, S.Lico, T.Cortigiani, G.Manzolini, P.Silva, E.Martelli (2016), “Scheduling optimization of Combined Heat and Power units with multiple degrees of freedom based on the superposition principle”, ECOS 2016 – Proceedings of the 29th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, June 19-23 2016, Portorož, Slovenia (Extension to journal under preparation).
- M.Spinelli, P.Peltola, A.Bischi, J.Ritvanen, T.Hyppänen, M.C.Romano (2016), “Process integration of chemical looping combustion with oxygen uncoupling in a coal-fired power plant”, Energy, Vol. 103, pp 646-659, doi: 10.1016/j.energy.2014.02.042.
- A.Bischi, E.Pérez‐Iribarren, S.Campanari, G.Manzolini, E.Martelli, P.Silva, E.Macchi, J.M.P.Sala‐Lizarraga (2016). “Cogeneration Systems Optimization: Comparison of Multi-Step and Mixed Integer Linear Programming Approaches”. International Journal of Green Energy, Vol. 13, Issue 8, Pages 781-792. doi:10.1080/15435075.2016.1161635.
- A.Taccari, E.Amaldi, A.Bischi, E.Martelli (2015), ”Short-term planning of cogeneration power plants: a comparison between MINLP and piecewise-linear MILP formulations”. Computer Aided Chemical Engineering, Vol. 37, Pages 2429-2434. doi: 10.1016/B978-0-444-63576-1.50099-6.
- A.Bischi, L.Taccari, E.Martelli, E.Amaldi, G.Manzolini, P.Silva, S.Campanari, E.Macchi (2015), “A Rolling Horizon MILP Optimization Model for the Scheduling of Tri-generation Systems with Incentives”. ECOS 2015 – Proceedings of the 28th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems 30 June‐3 July 2015, Pau, France. ISBN: 978-2-9555539-0-9 (Extension to journal under preparation).
- A.Valenti, S. Campanari, P. Silva, A. Ravidà, E. Macchi, A. Bischi (2015), “On-off Cyclic Testing of a Micro-cogeneration Stirling Unit”, Energy Procedia, Vol. 75, 2015, pp 1197-1201, doi: 10.1016/j.egypro.2015.07.152.
- A.Bischi, S.Campanari, A.Castiglioni, G.Manzolini, E.Martelli, P.Silva, E.Macchi (2014),“Tri-Generation systems optimization: comparison of heuristic and mixed integer linear programming approaches”. ASME Turbo Expo 2014, Vol. 3A, doi: 10.1115/GT2014-27028
- A.Bischi, L.Taccari, E.Martelli, E.Amaldi, G.Manzolini, P.Silva, S.Campanari, E.Macchi (2014), “A detailed MILP optimization model for combined cooling, heat and power system operation planning”. Energy, Vol. 74, Issue C, 2014, pp 12-26. doi: 10.1016/j.energy.2014.02.042.
- A.Bischi, L.Taccari, E.Martelli, E.Amaldi, G.Manzolini, P.Silva, S.Campanari, E.Macchi (2013), ”A detailed optimization model for combined cooling, heat and power system operation planning”. ECOS 2013 – Proceedings of the 26th International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems, July 16-19 2013, Guilin; China; Code 106099.
- A.Bischi, Ø.Langørgen, O.Bolland (2013), ”Double Loop Circulating Fluidized Bed reactor system for two reactions processes based on pneumatically controlled divided loop-seals and bottom extraction/lift”. Powder Technology, Vol. 246, 2013, pp. 51-62. doi: 10.1016/j.powtec.2013.04.004.
- A.Bischi, Ø.Langørgen, J.-X.Morin, J.Bakken, M.Ghorbaniyan, M.Bysveen, O.Bolland (2012), ”Hydrodynamic viability of chemical looping processes by means of cold flow model investigation”. Applied Energy, Vol. 97, 2012, pp. 201-216. doi: 10.1016/j.apenergy.2011.12.051.
- A.Bischi, Ø.Langørgen, J.-X.Morin, J.Bakken, M.Ghorbaniyan, M.Bysveen, O.Bolland (2011), ”Performance analysis of the cold flow model of a second generation chemical looping combustion reactor system”. Energy Procedia, Vol. 4, 2011, pp. 449 – 456. doi: 10.1016/j.egypro.2011.01.074.
- A.Bischi, Ø.Langørgen, I.Saanum, J.Bakken, M.Seljeskog, M.Bysveen, O.Bolland (2011), ”Design study of a 150kWth double loop circulating fluidized bed reactor system for chemical looping combustion with focus on industrial applicability and pressurization”. International Journal of Greenhouse Gas Control, Vol. 5, No 3, pp. 467 – 474. doi: 10.1016/j.ijggc.2010.09.005.
Book chapters:
L.Taccari, E.Amaldi, A.Bischi, E.Martelli (2015), “Short-term planning of cogeneration energy systems via MINLP”, in T. Terlaky, M. Anjos and S. Ahmed (Eds.), Advances and Trends in Optimization with Engineering Applications. MOS-SIAM Series on Optimization, Society for Industrial and Applied Mathematics (SIAM), Philadelphia.
“Politecnico di Milano International Fellowships”, R&D funding programme designed to attract young, bright and highly motivated post-doc researchers from all over the world: http://www.polimi.it/en/work-with-us/research-collaborations/international-fellowships/international-fellowships-edition-2012/
Scientific committee co-chair of the COST Action final conference Scientific Program committee: TD1207. “Optimization for efficient and robust energy networks”, 29 March – 1 April 2017, Modena- Reggio Emilia, Italy. http://www.cost-td1207conference.unimore.it/organizing-committee/
Next Generation Program – Announcement of 2015 Call for Proposal Results: http://crei.skoltech.ru/energysystems/2016/06/next-generation-program-announcement-of-2015-call-for-proposals-results/
2nd International Conference. Shaping research in integrated gas-, heat-, and electric- energy infrastructures: http://crei.skoltech.ru/energysystems/2016/06/1007/
-
Assistant Professor, “Energy Systems (Physics) & Technology”, Skolkovo Institute of Science and Technology, Moscow, Russian Federation, academic year 2016/2017, 6 ECTS credits
-
Adjunct Professor, “Energy and Environmental Systems”, Politecnico di Milano, Milano, Italy, academic year 2013/2014 & 2014/2015, 10 ECTS credits, Teaching Evaluation “High”: https://www4.ceda.polimi.it/manifesti/manifesti/controller/ricerche/RicercaPerDocentiPublic.do?evn_prodotti=EVENTO&k_doc=419501&aa=2013&lang=EN
-
Teaching Assistant, “Fundamentals of Energy Conversion”, Politecnico di Milano, Milano, Italy, academic year 2014/2015.
-
Teaching Assistant, “Fluid-Machines and Energy Systems”, Politecnico di Milano, Milano, Italy, academic year 2013/2014.
-
Teaching Assistant, “Energy and Environmental Systems”, Politecnico di Milano, Milano, Italy, academic year 2012/2013.
- Invited Expert, MIP Energy Management course 2014, Milano, Italy, http://www.mip.polimi.it/mip/it/Master/specialistici/Master-in-Energy-Management.html
- Invited Expert, Master RIDEF 2015 (Italian: “RInnovabili, Decentramento, Effficienza”), Master on Renewable Energies, Distributed Power Generation and Energy Efficiency, Milano, Italy,http://www.ridef.it/.
- Invited Expert, Combined Heat and Power (CHP) course 2015, Cranfield University, UK. http://www.cranfield.ac.uk/courses/training/combined-heat-and-power-chp.html
- Seminars: Skolkovo Institute of Science and Technology, Moscow, Russian Federation, 2015, 2016. Los Alamos National Laboratories – LANL, USA, 2015. Cranfield University, UK, 2014. ETH Zurich, Switzerland, 2014.
ФИО: Альдо Биски
Занимаемая должность (должности): Старший преподаватель
Преподаваемые дисциплины: –
Ученая степень: Ph.D (кандидат наук) в области энергетики и технологического проектирования, Норвежский Университет науки и технологии, 2012 г.
Ученое звание: –
Наименование направления подготовки и/или специальности: энергетика и технологическое проектирование
Данные о повышении квалификации и/или профессиональной переподготовке: нет
Общий стаж работы: 4 года
Стаж работы по специальности: 4 года